The Photonics Valley’s SP28-BDXXXX10X is designed for Bi-directional 25G serial optical data communications by using DFB laser transmitter and PIN receiver. It is a high performance module for 25G Ethernet and Option 10 CPRI applications which operate up to 10km. This module incorporates Photonics Valley’s proven circuit and technology to provide reliable long life, high performance, and consistent service.
understand more
The Photonics Valley’s SP28-CWxxLR10x is designed for CWDM 25G serial optical data communications by using DFB laser transmitter and PIN receiver. It is a high performance module for 25G Ethernet and Option 10 CPRI applications which operate up to 10km. This module incorporates Photonics Valley’s proven circuit and technology to provide reliable long life, high performance, and consistent service.
understand more
Photonics Valley’s QP40-MM85SR4C is designed to meet the requirements of 40G ethernet including breaking out to 10G SR links over OM3 MMF up to 300m. It is compliant with QSFP+ MSA, IEEE 802.3ba. It is cost- effective, low power consumption with a single 3.3V power supply. It is fabricated with all-metal and compact size housing for superior EMI performance.
understand more
Photonics Valley’s QP40-SM31-LR10-X is transceiver module designed for 10km optical communication applications, compliant with 40GBASE-LR4 of the IEEE P802.3ba standard. The module converts 4 inputs channels of 10Gb/s electrical data to 4 CWDM optical signals, and multiplexes them into a single channel for 40Gb/s optical transmission. The central wavelengths of the 4 CWDM channels are 1271, 1291, 1311 and 1331 nm as members of the CWDM wavelength grid defined in ITU-T G694.2.
understand more
The Product Requirements Definition (PRD) is present to the critical design specification for SPV's SFP56 53G BASE LR transceiver. SFP56 transceiver design for single electrical lane with 53Gbps high speed data rate transmission. The integrated transmitter (TOSA) built by EML chip modulated with 26.5625Gbaud/s PAM4 signal, receiver embedded with linear transimpedance amplifier for PAM4 signal recover. Both transmitter and receiver need PAM4 retimer PAM4 CDR chip for better transmission performance. On board MCU handling all hardware and firmware initialization and boot loader, firmware design compliance with SFP+ module Management Interface SFF-8472.
understand more
Coming soon...
understand more
Coming soon...
understand more
QP1H-MM85SR4C is QSFP28 module for duplex optical data communications support 25.78 Gb/s per lane data links. It is with the QSFP28 footprint to allow hot plug capability. Digital diagnostic functions are available via an I2C. The transmitter section uses a high performance 850nm VCSEL laser and is a class 1 laser compliant according to International Safety Standard IEC-60825.
understand more
Shenzhen Photonics Valley QP1H-SM31LR4C is designed to meet the requirements of 100G ethernet links over SMF up to 10km. It is compliant with QSFP28 MSA, IEEE 802.3ba and IEEE 802.3bm. It is costeffective, low power consumption with a single 3.3V power supply. The module has an aggregate bit rate up to 103.1Gbps by multiplexing of 4 independent LAN-WDM optical lanes, each lane capable of transmitting 25.78125Gb/s over 10km SMF. It is fabricated with all-metal and compact size housing for superior EMI performance.
understand more
